Semiconductor Testing & Prober Technology Insights

How to Select an Analytical Probe System

November 10, 2017

.

 Selecting a probe system is comparable to selecting an automobile. Like basic cars, most basic probe stations will get you from point A to point Z, but, also similar to cars, probe stations have a vast variety of modules and accessories to expand on basic system capabilities.

This blog has some extremely useful information about analytical probe stations and some of the most frequently asked questions surrounding them. Keep on reading to find out more information on some of the tips and tricks of selecting an analytical probe station.

What are Analytical Probe Systems?

Analytical probe systems, also referred to as prober, probing system, probe system, are often used in low volume probing applications such as research and development, device characterization, product development and failure analysis.  They are typically not used in a high volume production probing applications such as a 24/7 (24 hours per day/ 7 days a week) environment. There are several vendors that manufacture analytical probe systems but the typical family consists of manual, semiautomatic and fully automatic systems.

What parts do probe systems consist of? There are several key components of probe systems, including:

    • A base
    • A wafer stage
    • A chuck
    • A platen
    • A microscope mount
    • A microscope movement
    • Optics and manipulators.

There are three different types of Probe Systems that you should take note of. Let’s go into some detail about each one.

 
  1. Manual Probe Station

manual probe system

Manual systems are typically controlled manually, which means that the wafer stage and chuck (X,Y, Z and theta), platen (Z), microscope movement (X,Y and Z) and manipulators (X,Y and Z) are all moved manually by the user. These systems are normally used when there are not a lot of devices to measure or data to collect. A few advantages of manual probe systems are a minimum amount of training is required, easy to set up and to changeover from one setup to another and they don’t require electronics, PC or software which involves additional training and setup time.

  1. Semiautomatic Probe Station

semiautomatic probe system

Semiautomatic probe systems are typically used when multiple or all devices are to be measured. They are also used when small pads or lines are being contacted or where the Z contact and overdrive (scrub) have to be precisely controlled.

For some companies, with small size wafers and die, semiautomatic probe systems are used to meet their production requirements. Semiautomatic probe systems consist of similar components as a manual system with the exception of the stage and controls. The wafer stage is usually programmable (X,Y,Z and theta) and is moved via control electronics and software. Software adds a lot of capabilities to the probe system. A typical software package consists of a navigator window, wafer map and auto align. Using the navigator function allows the user to move the stage in any direction at various speeds or in an index mode via a software joystick or a mechanical one. A wafer map program allows you to set the map up to match the device – wafer size, flat and die size. You can select what devices are to be probed, all or a sample with a random pattern, and save the entire set-up.

Quite often a semiautomatic probe system is controlled externally vie GPIB, USB, TCP/IPor Serial via customer developed graphical user interfaces (GUI). Programs such as Labview, Matlab, Easyexpert are also often used.

  1. Fully Automatic Probe Station

fully automatic probe station

A fully automatic analytical probe system usually consists of the addition of a material handling unit (MHU or Robot) and pattern recognition (auto-alignment). They are typically used for production or when there are some unique requirements – no human handling, thin wafers or as a multi-purpose system to test wafers, wafers mounted on frames, wafers sawn and stretched on frames, carriers or trays of die. A link to an analytical probe system checklist …..www.semiprobe.com

What types of accessories are available to enhance a probe system?

In conclusion:

There are many different types and variation of probe stations! Most probe stations will get you from point A to point Z, but it’s crucial to know about all of the accessories and varieties of probe stations that are available in today’s market.

Request a discovery call or subscribe to our email list for more information. 

 Request a Discovery Call

 

New Call-to-action

Topics: Probe Systems Overview

Author: Doug Merrill

Doug Merrill, CEO, joined Semiprobe in 2016 and brings 25 years of operations, quality, and financial experience to the team. He has degrees in Engineering Physics and an MBA from Cornell University. He began his career with 14 years at General Electric, graduating from the Manufacturing Management Program and rising through the ranks of GE Energy. He has worked in executive roles for Husky Injection Molding and Dynapower Company, and sits on the board of directors of Orbit/FR, a microwave test equipment firm. Doug lives in Shelburne, Vermont with his wife and two sons. When not in the office, he can often be found sailing on nearby Lake Champlain.
Find me on:

Subscribe to our email list for the latest semiconductor news.

Semiconductor Wafer Testing Discovery Call

Subscribe to our email list for the latest semiconductor news.

SemiProbe Capabilities & Applications Guide for Wafer Characterization & Testing